Posts Tagged ‘Paul Fulton’

Diving into the Details

Saturday, September 24th, 2011

We need to button down the outstanding details so we can move forward expeditiously.  There are a couple, ok, lots, of details to button down.

Al wants to have a decision on paint, stain or paint/stain (pain?) for Monday.  And, we need to establish the audio, video, data, security and other wiring inside the house.

March 31, 2012 is our move-in date, which is cast in stone.  Or, more accurately, carbon fiber.

Looking at Black Stained Beams at Cinnabar Hills Golf Club

Our wooden beams that extend from the outside to the inside need to be one finish.  And, we’d like that finish to be dark.  Importantly, the synthetic wood structural beams that are above the original reclaimed Douglas Fir beams should look the same.  Yeah, a tall order.  Standard on our project.

Craig Rathe, our contact at Kelly-Moore Paints in Saratoga, suggested that we go to see the wooden beams at Cinnabar Hills Golf Club to see how they look.

Bryan did just that on Saturday morning.

Reviewing the Home Theater Layout at 300 San Jose

We hosted our daughter’s eighth birthday party at 300 San Jose last Saturday afternoon (September 17).  300 San Jose is a very modern and high tech bowling alley.   (Yeah, it was fun!).  We noted that they have a great projection screen and other relevant furniture and finishes for our home theater.

Bryan returned to 300 San Jose with a digital camera and measuring tape.

Reflecting, Green Building with Autodesk’s BIM software could have been used to verify the home theater design using the software’s three dimensional capabilities

Ending the Day at the Job Site

The day ended with Paul Fulton coming to our job site to review our proposed audio, video and data wiring plans.  Paul arrived in this blue Tesla Roadster 2.5 and parked just in front of our Nissan LEAF.  During our research of electric vehicle charging stations, on April 2, 2011 we looked at Paul’s charging station for his Roadster.

Craig Rathe, our contact at Kelly-Morre Paints, recommended that we review the wooden beams at Cinnabar Hills Golf Club. So, we did.

 

The exposed wood beams looked striking against the natural wood of the eaves.

Beams, exposed to the weather.

 

300 San Jose. (It was a beautiful, blue-sky California day!)

 

Screen layout in the lounge area, with the projector. The screen was 120 inches wide and the projector was 96 inches back from the screen.

 

Not being shy, Bryan took out his tape measure to take the dimensions of the room with the seating.

 

Very durable chairs and footstool ...

 

While the screen was flat against the wall, the two televisions were angled down for close viewing.

The screen was made by Da-Lite. Easy to follow up on from here.

Back at the job site, we wanted to document the low-VOC adhesives that we are using. Indoor air quality is very important to us.

Our friend, Paul Fulton, dropped by the job site to review our plans for audio, video and data layout and cabling.

Our Nissan LEAF has white carpool stickers, just like Paul's Tesla.